How to Nail Roofing Shingles
If you are wondering how to nail roofing shingles, the answer is simple: use nails and make sure they are spaced evenly throughout the length of the shingle. You should start the nailing process by placing the first nail about half an inch below the edge of the shingle. If you are using 3-tab shingles, place the next two nails just above the tab cutouts. For other types of shingles, place the nails evenly below the sealant strip, and you should leave a 1″ space between the outermost nail and the shingle’s edge. metal roofing types
To prevent high nailing, make sure you check the shingle after nailing. If the nail is placed too high, it will catch the top edge of the shingle below. If the nail is too low, the shingle will eventually slide off the roof. In addition, water will eventually seep through the nail head. When installing shingles, be sure to read all instructions on the shingle and nailing directions carefully.
When nailing roofing shingles, make sure you use nails that have a 3/8-inch head and a 12-gauge shank. If the nails are too short or too long, they are likely not secure enough, so be sure to remove them. Nails are commonly required to be spaced four or six per shingle to create a tight seal. You should also carefully measure the size of the nail in the cutout area of the shingle.
In most cases, you can simply use a pneumatic nail gun to fasten the shingles. This method is much faster than hand nailing, and can create consistent sheathing and gaps. Also, it is more efficient than hand nailing, which can lead to inconsistency, vibration on the structure, and human fatigue. Hand-nailing can also lead to interior damage. And if you have a bad temper, you can try the guideless method of nailing shingles.
The final step in nailing roofing shingles is to measure the length of the ridges and hips of the roof. Divide the length of these sections by 35 and use that number to estimate the number of bundles you will need. Make sure you include the length of each shingle by three. Ensure that the shingles are not overlapped, as this can cause cracks and sagging. And remember to add adequate ventilation.
It is important to note that there are several different kinds of nails for roofing. Copper nails are more durable than steel and galvanized nails, and are typically used with slate roofs. They also last longer than galvanized nails. Galvanized nails often show signs of deterioration after the zinc coating wears off. As an added bonus, copper nails can be easily removed without breaking the slate. However, it’s not as durable as the next choice.
In coastal areas, you’ll want to avoid aluminum nails. This is because salt can cause aluminum to rust and deteriorate. This will compromise the hold of the shingles and may lead to blowoffs. If you’re replacing a five-year-old roof with a new one, aluminum nails will probably cause some missing shingles. Instead, use stainless steel nails. You’ll be grateful when you see that storm.