What Is a Starter Strip in Roofing?
You might be wondering, “What is a starter strip in roofing?” This article will explain the importance of this important roofing element. To avoid a leaky roof, you should follow the manufacturer’s instructions for nailing shingles. To prevent leaks, install starter strips in roofs that have a two to four percent pitch or greater. Otherwise, they will impede seamless water flow on the roof. This can lead to leaking. Roofing Company Powell
It’s important to note that the starter course must overhang the eaves and rake boards by at least one inch. It should also be positioned close to the edge of the decking or fascia, not too far from it. To prevent this, make sure the starter strip is within 1/4 inch of the roof edge. Nails should be placed close to the decking or fascia, not between them. Most roofers use three-tab shingles to serve as starter strips. While these shingles may appear attractive, they aren’t the best option because they can cause shingle blow-offs.
The main purpose of a starter strip is to secure the edges of the roof. It is important to use the proper starter strip to ensure that the shingles are properly installed. Choosing the wrong starter strip can cause serious problems, wasting time and money. But fortunately, there are a number of starter strips for asphalt roof shingles available on the market today. GAF is a leading supplier of asphalt roof shingles in the US. More homes are covered with GAF shingles than any other brand.
Roofing contractors use starter strips to prevent water leaks under shingles. They protect the edges of the roof from wind and water by providing an overlap function. Moreover, the starter strip prevents water from leaking beneath the edge of the roof deck. If the starter strip is not installed properly, it could cause the shingles to lift during strong winds. If you’re wondering, “What is a starter strip?” then read on.
A starter strip is an essential part of any roofing project. The strips protect shingles from wind and water penetration by acting as a seal between rakes and eaves. They also prevent the shingle layers from drooping. They also thicken shingles over the edge of the roof, helping prevent leaks and uplifts caused by strong winds. They are particularly important in windy areas. So if you are looking for roofing materials, be sure to use a starter strip.
Roofing contractors should consider the pros and cons of a starter strip before recommending a new roof. The pros and cons of using a starter strip include the cost, the materials, and the labor rate. For instance, a roofer can charge more if you need to remove multiple layers of asphalt roofing before installing a new one. A starter strip also serves as a rake edge strip and prevents wind-uplifting field shingles.
There are several different types of shingles, but there are also some that are made of asphalt and can be used for a starter strip. If you’re using architectural shingles, you’ll need a starter strip. A starter course will seal and cover joints, but does not need to match the shingles you’re using. The only exception to this rule are if you’re using 3-tab shingles. For example, if you’re installing IKO Armourshake(tm) shingles, you’ll need a starter strip.