How to Patch Roofing Shingles
Whether you are repairing a damaged shingle or just want to cover a bald spot, here’s how to patch roofing shingles. Using roofing cement, you can attach a new shingle to a broken one. Be sure to place the patch over the nail heads that secured the shingle in place. If you want to add a flashing to your roof, make sure you buy nails made from the same metal as your patch. best choice roofing
The first step to patching a broken shingle is to identify the crack location. After finding the exact location, you can apply sealant to the damaged area. Spread the sealant evenly using a roofing utility knife. To camouflage your repair, scatter granules of shingles on the area you are sealing. You can then cover the area with roofing cement. If the crack is severe, you may need to replace the entire shingle.
You’ll need some supplies for this project, including roofing cement, galvanized roofing nails, a pry bar, and a utility knife. First, measure the hole. Then cut the patch according to the size of the hole. Use a liquid nail product to attach the patch to the new 2×4 framing. Next, spread a thin layer of roofing cement in the hole. When you have completed the patch, extend tar paper below the top shingles by about 2 inches.
If you can’t afford to replace the entire roof, patching is an excellent option. A good patch will allow you some time until you can pay for a new one. However, it’s important to remember that replacing a roof is not a cheap option and can lead to other issues. You should consult with a home roofing professional before trying it yourself. However, make sure you have adequate experience and a safe ladder.
When patching shingles, you should avoid lifting them too high. The risk of water damage is greater if the shingles are loose. You should avoid prying the nails directly on the shingles, as this will harm the granular surface of the shingles. Instead, try lifting the shingles and nails together. Use nails made from galvanized steel and make sure they’re flat. In addition to this, be sure to nail down the nails in the new shingles to keep water out.
When you notice patches of loose shingles, check your roof for signs of damage. Sometimes granules have fallen off exposing dark asphalt. These patches can be moss or algae. The granules fall off as the shingles age, exposing them to harsh weather. This can cause water damage to interior areas of the home. You may want to call a professional to get the job done correctly.
Before you start patching your roof, make sure you have a safe ladder and footing. The type of roof you have and the location of the damage will determine the proper way to access your roof. Regardless of your skill level or your experience, you should always use a ladder and secure your footing before taking any steps. Once you’ve reached the spot where you need to patch, assess the damage and check for curling corners.